Special brushes for screen printing
The KIWO screen brushes are used to transfer screen printing chemicals onto the stencil. The brushes’bodies are made of chemical resistant plastic, the bristles of monofil plastic threads. In order to preventcontamination of the bristles, their ends are not spliced. The different lengths of the bristles are adaptedto the dedicated purpose of the brush and optimize the transfer of chemical products onto the stencilwithout mechanical damage.
An ergonomical shaped handle facilitates a non-tiring handling of the brushes. At the end of the handle there is a hole to suspend the brushes after use. For each application the brushes are marked on theirback. The colour is an additional control for the user.
The range of KIWO screen brushes
Hints and tricks
Depending on the applicaton of the brush, the used chemicals can either be acids, alcalines or solvents.It is therefore recommended to clean the brushes thoroughly after use. This does not only increase theirdurability, but also prevents the transfer of contamination onto the stencil. In most case, rinsing withwater is sufficiant.
In order to optimize the use of the KIWO SCREENBRUSH do not lay the brushes on the bristles to prevent their deformation. Suspend the brush to allow liquids to run off. Immediately replace brusheswhich have sticky, cut or missing bristles.